Logo
Work

Minimal Triangle Lamp

Showcase image 1Showcase image 2Showcase image 3Showcase image 4
Work code / Version:MTL V1.0
Host software:Bambu Studio
Release date:11/21/2026

Work type:3D Printed Model

Work description:Minimal Triangle Lamp is a simple triangular lamp for anyone who has the Bambu Lab official KC009 relief light board kit. It uses no screws, no glue, no magnets, and no extra tools. The parts fit into optimized slots and snap together. Connect the two light boards with the kit link cable, attach the switch cable, close the back cover, plug in USB, and it lights up. You can change the color plate to different filament colors. The current version has been prototyped and adjusted multiple times.

What is this

Minimal Triangle Lamp is a simple triangular lamp for anyone who has the Bambu Lab official KC009 relief light board kit.

Who it is for

It is for people who want to use the KC009 kit to make a small lamp without screws or glue.

How it works

I designed the assembly to use no screws, no glue, no magnets, no support parts, and no extra tools.

Connect the two light boards with the kit link cable, attach the switch cable, insert the parts into the slots, close the back cover, plug in USB, and it lights up.

Supported specs

Compatibility: Bambu Lab official KC009 relief light board kit

Power: USB

Switch: switch cable from the kit

Connection: 2-pin terminal plus light board slot

Image 1

Color: color plate can be changed to different filament colors; I showed orange

Assembly steps

1. Connect the two light boards with the kit link cable first.

2. Then attach the switch cable to one of the light boards.

3. Pass the 2-pin terminal through the round hole in the back cover first, then insert it into the light board slot.

4. Insert each component into its slot.

5. Snap the back cover on.

6. Plug in USB and turn on the switch.

Image 1

Print notes

Before release, I prototyped and adjusted this multiple times, so installation and removal are smooth.

I tuned the slots so they are easy to insert and remove but still hold well.

I tested this several times and did not see the light board getting hot to the touch or other safety issues; electrical products still carry unforeseeable risks, so use your own judgment and be careful.

The color plate can be printed in different filament colors, and the light color changes with it.

Files and license

Free for personal use. For commercial licensing, see the Patreon button.

Image 1

Version plan

If this work gets enough downloads, I will keep publishing KC009 kit variants.

There are also new upgrade ideas for the current form; one variant is inspired by my earlier 3D light video work.

Design notes

I chose a triangle because it is stable and close to pyramid and meditation shapes.

Some say this shape gathers energy and brings luck. I hope it does bring you some good luck.

Image 1
#Design #Snap-fit #Tool-free #Assembly #Lamp #打印灯具 #Triangle #KC009 #拓竹 #Bambu #台灯 #Powered #三角灯 #Minimal #3D #USB #Lab #免工具装配